How To Change A Whole House Water Filter?

How To Change A Whole House Water Filter?

Changing your whole house water filter is an important task that many people do not know how to do it correctly. This blog post covers everything you need to know about changing a whole house water filter, including the best brands and what type of filters are available for different needs.

Changing a water filter is not as simple as it seems and should be done with care. It’s important to make sure the new filter isn’t too big for your faucet, and you’ll want to watch out for any leaks because this could lead to an expensive repair. If you’re unsure about what faucet type or size, call a plumber in order to avoid any mishaps. This blog post will teach you how to do it yourself so that you don’t have to worry about being without clean water while waiting on someone else! You can also save money by doing this project at home instead of hiring professionals which are more costly than most people think. So grab some tools and let’s get started!
Are Faucet Water Filters Effective

What Is A Whole House Water Filter?

A whole house water filter is a device that is installed at the point where your home’s main supply of water enters. As you can probably imagine, it plays an important part in providing clean and safe drinking water to every tap in your home. It also reduces the chances of falling ill because of contaminated drinking water.

There are 2 main types of whole house water filters – point-of-entry and point-of-use. Point-of-entry filters filter a large volume of water as it enters your property, before it is distributed throughout your home. These types of systems are installed at the city main or a well’s pressure tank. They are normally larger in size, more expensive to buy and install, but easier for use for the entire household.

Why Do You Need A Whole House Water Filter?

There are many reasons why you should install a whole house water filter. First of all, your tap water may contain harmful chemicals like chlorine or chloramines that can be detrimental to your health. Although these chemical agents are added to the water supply in order to make it safe for drinking, they pose some serious health risks when consumed on a daily basis for years at length. Of course, every government authority involved with the public supply will tell you that your tap water is safe and drinkable as it is (which is technically accurate), but what they don’t mention is how this “drinkable” water can damage your body over time due to repeated exposure. And let’s face it – the majority of households do not give their water supply a second thought and simply end up consuming tap water on a daily basis for years.

Why Is The Whole House Water Filter System A Necessity?

There are 2 main reasons why a whole house water filter is an absolute must-have in every household. First of all, you need it to improve your health and well-being by removing harmful elements from the tap water supply. And secondly, if you plan to have children or babies in the near future, installing a whole house water filter system before they arrive can ensure that each and every one of their drinking sessions is free from potentially hazardous chemicals.

Over time, if your home’s tap water is not filtered or purified, you can be exposed to high amounts of chlorine. And chlorine isn’t the only problem – it also contains chloramines, which are known to cause kidney damage, asthma and eczema. Other common chemicals found in tap water include fluoride, copper, nitrates etc., but chlorine (and chloramine) is by far the most prevalent one. This is why having a whole house water filter installed before your first baby arrives is so important – even if everything seems to be working fine with the tap water supply at present.

How Does A Whole House Water Filter Work?

There are two types of whole house water filters you can get for your home, and each one works in a slightly different way. The first type of filter is known as an active carbon water filter, which uses activated charcoal to clean the water supply. This process essentially forces all tap water through the cartridge by pushing it out under pressure. An active carbon water filter will remove chlorine, chloramine and other unpleasant chemicals from your home’s potable (drinkable) tap water supply during this procedure.

The other variety is referred to as a sediment filter, which uses fine strainer-like materials that trap dirt, rust or other particulate material before it enters the main drinking water holding tank within your house. Sediment filters come in several different forms, and one of the most common is a traditional water pitcher that uses gravity to reduce sediment in the drinking water. This type of filter works by simply filling up the pitcher with tap water and then allowing it to settle for an hour before pouring out clean filtered water from the top.

A whole house sediment filter will not remove chemicals like chlorine; however, they will trap harmful particles such as rust or sediments (so your larger household appliances don’t need to be replaced quite so quickly). Even though this filter does not technically purify the drinking water supply, over time sediment filters still make your tap water cleaner overall.

Which Type Of House Water Filter Should You Get?

  1. Reverse Osmosis Water

The first type of whole house water filter is known as a reverse osmosis system. This sits on top of your existing sink tap, where it sucks the water out through one hose before pushing it back out through another hose under pressure. The most common ways to keep this filtered water fresh are by either buying 2-3 gallon food grade mineral jugs or buying an in-house dispenser (which can be expensive). Reverse osmosis filters use several different stages to completely purify your drinking tap water, using 3 main types of filtration technologies:

  • Pre-sanding – A fine mesh with microscopic pores that remove organic materials and other impurities down to 10 microns.
  • Fine Filtering – A mixture of carbon dust and diatomaceous earth are used to remove contaminants down to 1 micron.
  • Reverse Osmosis – The last stage that uses a semi-permeable membrane, removing anything between 0.01 -0.001 microns in size (like bacteria, viruses and pharmaceuticals). 
  1. Carbon Water Filter

The second type of whole house water filter is known as an active carbon water filter. These systems are the most common, and they use activated charcoal to clean your drinking tap water. Active carbon filters have a lower per-gallon filtering capacity than reverse osmosis filters do, but they are also much cheaper to install (using a sediment filter).

The best thing about an active carbon water filter is that they are incredibly easy to maintain. All you need to do is replace the carbon once every 6 months (which can be done using an easy twist-off cap), and you will get unfiltered tap water again if the pressure drops below normal levels.

  1. Ultraviolet Disinfection

The third type of whole house water filter is known as an ultraviolet disinfection system. This uses UV-C germicidal lighting to kill any bacteria or virus that happens to pass through it, and there are two main types available:

  • Iron Bone – An iron post with a germicidal lamp that runs along the top. These tend to be better at filtering sediment than bad bacteria & viruses (although they do technically remove both).
  • Titanium – A titanium tube lined with fluorescing glass fibers. This tube requires very little pressure in order to work well, so it’s ideal for homes with low-pressure taps.
  1. Ion Exchange Water

The fourth type of whole house water filter is known as an ion exchange system. This uses salt & fresh water to create exchanged ions which are used in order to remove free impurities from the water, meaning that the only downside with this option is that it requires regular maintenance (where you need to refill the salt tank once every 6 months or so). How Effective Are The Best Whole House Water Filters?

Today’s advanced filtering technologies have made home filtration systems much better than their predecessors were when they first came out. For example, just a single quick-change cartridge can provide both bacteria & virus filtration using active carbon filters, and these replacement cartridges are available at any hardware store for less than $10 each.

  1. Aeration Filter

The fifth type of whole house water filter is known as an aeration system. This head on this type of filtration system can be fitted to any standard sink tap in order to add air bubbles into the drinking water, which neutralizes chlorine and it encourages sediment to become dislodged from hard water areas. Aerators are extremely cheap to install (with a basic unit only costing around $25) and they require almost no maintenance at all.

How To Install Whole House Water Filter Systems?

It’s important to remember that installing a whole house water filter system can be quite challenging, especially if you have never done it before. If you don’t know what you’re doing, then the installation of such a water filtration system will require an expert plumber (which can cost $100 or more), so please keep this in mind before you do anything rash!

Reverse Osmosis Filters: Reverse osmosis filters use several different stages to completely purify your drinking tap water. The first stage is known as pre-sanding which removes organic materials and other impurities down to 10 microns using a fine mesh with microscopic pores. The next stage uses a mixture of carbon dust and diatomaceous earth to remove chlorine and bad bacteria, with this resulting in around 99% of impurities being removed.

The third stage uses a thin film membrane that removes more than 95% of the remaining organic materials & heavy metals. This process does use some pretty powerful chemicals though, so please take note before you start installing it yourself.

Water Softeners: Water softeners are quite different from reverse osmosis filters because they don’t require any complicated installation steps or additional plumbing fittings to make them work. All you need to do is attach up the included salt tank (which can be mounted anywhere) and attach your taps to feed water into it (like an aerator system). Ultrasonic Scalers: An ultrasonic scaler is another excellent system which uses sound waves to remove calcium and magnesium deposits that are stuck on the inside of your pipelines. This results in lower levels of limescale & iron bacteria, providing you with better quality drinking water every time you turn on the tap.

  1. Location – Where To Install The Water Filter?

In order to get the best possible results with your whole house water filter, you need to make sure that it’s installed correctly. You will also need to consider where you are going to install the device itself, as this will have a big impact on the pressure of the water once it has been filtered. A standard drinking water tap can usually use more than 3 gallons of incoming pressure in order for it to flow properly, so keep this in mind before doing anything rash!

Before Or After Water Softener?

If you know that your water softener is already struggling to deal with the amount of minerals in the incoming tap water, then I would strongly advise buying a whole house water filter (and installing it before the rest of your home’s plumbing). This will make sure that your appliances are not at risk from limescale build up or bad metals & bacteria, but please remember to replace the filters every 12 months for maximum filtration performance.

Is Outside Installation A Good Idea?

Whole house water filter systems are usually installed outside of the home, as this helps to prevent any damage from being done to your internal plumbing. It also means that installation costs will be a lot cheaper, as you only have to drill one hole in your wall for the incoming pipe.

When it comes to installing a whole house water filter system, there are certainly some things that you need to think about before doing anything rash! If you want to make sure that you get maximum efficiency and reliability from your unit (along with superb results), then please keep everything listed above in mind at all times.

Water Softeners: Water softeners work by passing through ion-exchange resins which attract and remove hard minerals such as calcium and magnesium. The more of these minerals which are present in the incoming tap water, the less efficiently your unit will work.

  1. Parts & Tools Needed For

The whole installation process is surprisingly easy on most units, as long as you have all of the parts and tools needed on hand. There are only a few steps involved with the creation of this system in most cases, but I do need to let you know about some of these before we continue!

Parts Required: Your filter will come with everything that you need to create your new setup, but it’s important that you don’t lose any of the included items. You’ll notice that the whole house water filter comes with 3 main components which are plugged into each other in some way or another – They are as follows; The pre filter tap adapter (or “incoming line” if you prefer)

The “incoming line” is quite important as it’s what allows water to enter your whole house system. It attaches directly to the cold water pipe in your home (just make sure that you’ve shut off the water supply before installing this part!), and also contains your prefilter cartridge for catching any large objects which may be hiding within the tap water. Be warned, if there are any leaks found here then you could end up with some sick pets or kids! The prefilter holds onto all of these larger particles, preventing them from entering into the main system where they could cause damage.

  1. How To Install Whole House Water Filter Systems: Step-By-Step

Step1# Shut Off Water Supply

The first thing that you should always remember is to shut off your main water supply if you want to reduce the risk of flooding & leaks! It’s best to go ahead and cut them at the meter (or outside tap), but sometimes this isn’t possible even though you may be tempted (such as in an apartment building). Always try your best, so that this doesn’t cause problems for anybody else.

If there are no other options available, then it might be a good idea to ask whoever oversees the property for permission before carrying out any work. This can include neighbors or landlords who have an access code for opening up the gate/entrance door etc… If they say “No” then just remember that there are other ways to prevent leaks, even without shutting down your water supply.

Step 2# Prepare To Make New Tap Connections

Begin by fixing the pre-filter bowl into position with its built-in clamp. You can find this out at the bottom of the unit itself, where you should also notice a section of pipe which is threaded onto it’s exterior (this is what allows for connection). If your tap connector already has nuts & bolts involved then make sure that they are tightened up securely, otherwise use Teflon tape to finish this off before moving on to step 3!

If your pre-filter doesn’t have any external attachments then you’ll need to purchase some Teflon tape instead. This will be used to create a watertight seal between the pre filter bowl and any other pipe which it attaches to. Just remember to wrap this material around the threads before putting everything back together, making sure that you cover all gaps as best as possible.

Step 3# Fit New Filter Unit Into Position

Attach the filter head onto the point where your cold water enters your house (this can be found behind most sinks). You may need some help holding it in place, but make sure that you hold it correctly by using both hands on each side of the unit. Once you’ve fitted it into position then you will need to secure this with a new clamp for additional support – This might take a few tries until everything sits properly! either an adjustable wrench or a large channel lock pliers.

Step 4# Assemble & Attach Plumbing Connections

The last thing that you will need to do is attach the plumbing connections between your cold water supply and the filter unit itself! After this, all that you will need to do is turn on the main water supply again, but make sure to double check for leaks before continuing (use a little soap or food coloring if needed). Here are some pointers which might help;

Check For Leaks: The easiest way of doing this is by using soapy water in order to create bubbles wherever there are any gaps in the plumbing job. Just put a few drops onto each connection point, then take a look at them with clear running water turned on for a few seconds.

Hang Filter Unit In A Safe Location: This is an important part of the installation, as you will want to be sure that it’s safely secured so that it can’t fall off or get knocked out of position while your new water supply is being put into use. If you have a lot of countertop space then this might not be a problem, but if there isn’t much room then you might need to think of a better solution for holding it in place during installation.

Step 5# Turn On Water Supply & Enjoy!

Now that your whole house water filter system is finally installed and ready to go, all that you will need to do is turn on your main water supply line again and get drinking from the tap. If you were only using the prefilter on its own, then you might notice that your water pressure has improved quite a lot!

How To Flush Your Whole House Water Filter?

If your water filter system becomes clogged up and is unable to provide you with clean drinking water, then you will need to flush it before continuing.

The good news is that this isn’t actually a hard thing to do and can be done within minutes (although it might take longer if the problem has been going on for a while).

  1. Why Should You Flush Your Filter System?

If you own a whole house water filter system then it is likely that you would want to keep it as clean as possible. This is because sediment and rust can sometimes build up in the piping, which can lead to decreased water pressure and bad tasting (and smelling) water. By flushing your filter system regularly, such as once or twice per year depending on use, then all of this can be prevented from happening and everything will continue working well for years to come!

  1. Tools Needed

If you need to flush out your whole house water filter system then it is likely that all that you will need in order to do this successfully are a bucket, a wrench and some screwdrivers. These tools should all be available at home improvement stores or in your own toolbox, so if they aren’t there already then just pick them up on your way.

  1. How To Flush Your Whole House Water Filter: Step-By-Step

Step1# Turn Water Supply Off

The first step is to turn the water supply off that is coming into your whole house water filter system. If you need help doing this, then just ask!  

Step2# Cut Supply Line & Let Air Rise 

After you have turned off the supply line for your whole house water filter, then you will need to cut it. This will allow air to rise up and out of the filtering system all at once instead of forcing it out through individual faucets or appliances. This is why cutting the line should only take place right after turning the main water supply off. By doing this properly, sediment can be flushed away effectively without causing any damage to other parts of the unit itself over time!

Step3# Flush Filter 

Then, it is simply a matter of flushing the filter system itself. All you need to do for this part is take your bucket and pour in about 20 gallons or so before turning on the main water supply again (make sure that all appliances are off!) Then, turn on the faucet closest to where you cut the line before, allowing fresh water to run through until it’s clear once more. After this has been done successfully, then you can repeat steps 1 through 3 several times before moving onto step 4!

Step4# Turn Water Supply Back On Again

After you have successfully flushed out the whole house water filter unit, then you will need to turn the main water supply back on again. This is extremely important because if you don’t do it immediately after flushing, then your faucets might still be flowing with unsuitable water. By turning the main water supply back on and letting air rise up and out of the filter system, then every part of it will be ready for use!

How To Change A Whole House Water Filter?

So, what if you need to replace your whole house water filter? Well, this is actually a pretty simple task as long as you have the right tools for the job. If you don’t have a wrench or a screwdriver handy then it’s best just to go ahead and pick up a small kit that will include everything that you might need in order to get the old unit out and the new one in.

Once you have all of the necessary tools for the job, then simply disconnect the filter in its entirety by unscrewing it. Next, do exactly the same with your new replacement filter before slipping it into place and screwing everything back together again! After this is done successfully, then you should be good to go with an entirely working whole house water filter once more!

Purewater products are experts in whole house water filters. They are able to professionally install and service units at homes throughout central Florida. So if you want to make sure that your whole house water filter is installed correctly and serviced regularly then be sure to contact Purewater products today for more information!

  1. Why Do You Need To Change Filter?

The first step is to find the size of your whole house water filter. There should be a sticker on the system itself with the size information. If you can’t find this, then another way to check is to take off one of your faucet filters and measure its length from tip to tip.

Once you have this piece of information, then you will need to know what type of filter media that you have installed in your unit before deciding which replacement cartridge you should purchase. Most common filtration media include:

  •          Carbon / Charcoal Filters
  •          Sediment Filters
  •          Taste / Odor Removal Filters

After finding out what kind of filter media that is in your system, then you have to find out what size cartridge replacement that you need.

  •          4″ Cartridges are used for the majority of standard whole house water filter systems.
  •          6″ Cartridges are used when a home has low-flow shower heads or no hot water issues. This is also helpful in very large homes or with many bathrooms.

Once you know all of this information, then it’s time to get shopping! You should be able to find any filters and cartridges that you will need by simply heading over to your local hardware store and looking around the plumbing section. If not there, then check online for filters and cartridges that fit your system until you find something suitable.

  1. Tools & Accessories Needed

To make changing your whole house water filter as easy as possible, then you should pick up a few tools and accessories to use during the installation. This includes:

  •          A Filter Removing Wrench
  •          Viton or Nylon Washers (These are for when you install your system)
  •          Hose Clamps (These are also for when you install your system)
  1. How To Change A Whole House Water Filter: Step-By-Step Instructions

Now that you have all of the necessary tools for the job, it’s time to get started! Here are some step-by-step instructions that will make changing your whole house water filter as easy as possible for you !

Step1#: Turn off the power to your whole house water filter system.

The first step is to turn off the power supply to your whole house filtration unit before removing it from any brackets or shelves that you might have it mounted on. This includes shutting off the electricity at your electrical panel and ensuring that all valves feeding into the system are closed tightly.

Step2#: Take the filter out of its housing.

Once you have turned off the power, then it’s time to get started! Before removing your whole house water filtration system from its bracketing or housing area, then you must first disconnect all pressure lines that are feeding into the unit itself. After doing this, then you can use a filter wrench to gently unscrew the system from its housing.

Step3#: Install your new replacement cartridge into the housing.

Once you have your entire unit out of it’s housing area, then you will need to install the replacement cartridge that you purchased for your system and place it inside of the existing housing. Be sure to tighten the cartridge as much as possible with your hands first and then use a wrench to tighten it just a little bit more for safekeeping.

Step4#: Re-connect all pressure lines feeding into the unit.

Now that you have tightened up any loose connections from Step3, then you should reconnect all of those lines securely back into their original positions. Make sure that none of the lines are leaking water before you move on to the next step!

Step5#: Remount your system to its bracketing or housing areas.

The final step when replacing your whole house filtration unit is to simply remount it back onto any brackets or shelves where you originally had it housed. Once you have reinstalled your system back onto these areas, then you can turn the power supply back on and check for leaks in each of the connections with soapy water to ensure that nothing is leaking.

  1. How Often To Change A Whole House Water Filter

The frequency of changing your whole house water filter depends upon a couple of different factors. These include:

  •          The overall quality and type of the filtration system that you have.
  •          How much household activity is taking place, such as doing dishes or running appliances that require water.

In general, most whole house water filters should be changed every 6 months or so – or when your pressure drops by 20% or more. This is when you should call a professional to make the necessary changes in order to keep your home safe and healthy for years to come.

  1. What Happens If You Don’t Replace Your Filter?

One of the worst things that could happen with your whole house water filtration system is that you are not refreshing it with a new replacement filter every 6 months or so. Over time, this will lead to dirtier and dirtier filters in your home which can cause the following problems:

  •          Brown or discolored water coming out of your faucets in your home.
  •          Low pressure when using any appliances requiring water within your home.
  •          A buildup of sediment inside of each one of your pipes over time.

If you do not replace these filters at all, then there is a good chance that you will have many problems down the road after just 1 year’s worth of neglect.

  1. Important Tips Regarding New Filter Replacement

It is important to not just grab the first water filter replacement cartridge that you can get for your whole house system. Instead, you should look around and find one of the most reputable manufacturers in order to ensure that there are no leaks or problems with installation when putting your new filter in place. A good example of a well-known company in this space is Pentek, who has been in business for decades and is known throughout the industry as having high-quality products.

How To Maintain Whole House Water Filter Systems: Step-By-Step Guide

Step1#: Turn the power supply off to your whole house water filtration system.

Before you can replace any parts of your home’s filtration system, it is important to make sure that there is no pressure in the lines and then shutting off this power source. To do this, simply go into your electrical panel and turn the switch off that controls your water filtration unit. This will ensure that there is absolutely no chance of an electrical shock while working on this system.

Step2#: Remove all tubing from the old cartridge assembly.

Now that you have turned off all of the power feeding into your entire filtration system, then you are free to begin changing out each part on a one-by-one basis. The first part that you want to replace is the tubing – as this is where any leaks will occur. To remove the tubing, simply twist and pull on each line until it comes out of its housing or bracketing.

Step3#: Remove the old cartridge from the unit housing.

To do this, use your pliers and carefully put them over one end of the filter and then grip tightly before turning counterclockwise in order to turn it off. Once you have turned off this part of the system, then place it into a bucket to hold all of these parts for recycling later down the road (e.g., crushed aluminum can be recycled). Step4#: Put on new filter cartridge assembly by above steps

Once you have removed the old filter cartridge from the unit housing, you are now free to put on your brand-new replacement water filter. This is simply a matter of reversing the order that you went in to remove it and then putting it back into place. You can use your hands to do this or you can grab both ends and give them a good twist in order to make sure they are attached tightly and securely (you should not need any tools).

Step5#: Refill system with clean drinking water.

Once you have replaced all parts of your filtration system, then simply fill up each tank with clean drinking water before turning on the power supply again. Now that everything has been turned back on, there is no longer any risk of any electrical shock while working with this system.

Step6#: Inspect the installation.

After allowing your whole home filtration system to fill up with water, check each of your connections for any leaks. This is very important as you do not want dirty water leaking all over your floors and making a mess. You can use soap or food coloring in order to see if there are any leaks/spots on the ground after it has had time to settle (i.e., 30 minutes). If you turn off all of the valves and then come back later on, you will be able to easily identify which connection needs to be tightened (if any). After tightening these sections, simply try running water through them once again until no more bubbles appear. If there are no leaks, you should now clean up the mess and dry it all out.

Step7#: Look at your yearly calendar or set a reminder to change out your whole house water filtration system every six months.

Once you have put in your new replacement filter cartridge assembly, then it is very important that you look at every six months on your yearly calendar so that you can ensure that this part is being changed routinely. Since many of these filters are made with carbon-based media, they will begin to clog up after several months of use which can lead to decreased pressure throughout your home’s entire piping system. This means that each faucet will start having lower water output until eventually there is barely any water coming out at all – which is why it is very important to change your whole house water filter cartridge assembly on a regular basis. If you set up a reminder on your phone, computer, and tablet for every six months then you will never have to worry about forgetting when it’s time to change the part again.

Step8#: Keep an eye out for any leaks throughout the year.

Even if everything seems fine with your new replacement cartridge, please keep an eye out for any leaks around the fittings of the unit itself or within each line that feeds into these valves. While chances are there won’t be any problems this early in its installation, anything can happen over time so it’s always good to make sure that nothing like this happens in order to prevent any future damages.

How Do You Change A Whole-House Water Filter Cartridge: Step-By-Step

Step1#: Turn off all valves that supply water to your garage.

In order to do this, you have to locate the three separate valves along your main line. You can use a wrench or pliers in order to turn these knobs so that each one is either pointing towards the ground or facing outwards so nobody accidentally turns it on. If you don’t know how exactly they work, please consult with someone who does (e.g., a plumber) before proceeding any further. Now everything will not be working until you are finished with this task, which means no water whatsoever is available for usage inside your home.

Step2#: Unscrew filter cartridge assembly from housing

At the bottom of the system there should be some type of housing that pops open in order to reveal the internal parts. Begin by using a wrench, pliers, or socket wrench in order to unscrew these pieces from one another until they are separated.

Step3#: Wash both ends of the replacement filter cartridge assembly with soap and water.

After removing your old cartridge, make sure you wash out both ends well with soap and warm water. This way there will be no grime leftover from this important part meaning it is ready for installation within the system at any time. Now that everything has been cleaned up, you can proceed to the next step in order to add in your new filter cartridge assembly into place.

Step4#: Attach new filter cartridge assembly to the valve body.

Once you have moved the new cartridge assembly within your hand, you can now take this part and screw it into place. After doing so, it should be pretty firm in its position so there shouldn’t be any need to worry about it moving out of place while turning on the valves for this brand new filter.

Step5#: Turn on all valves that are supplying water to rooms throughout the home.

Once everything has been replaced with a newer version, turn these knobs back to their original positions. This will allow fresh water lines to fill up over time until each fixture inside your home is able to resume its regular function once more. Now if you did everything correctly then all faucets throughout your house should come back online at full speed.

Do Whole House Water Filters Reduce Water Pressure?

That is a bit of a trick question since the answer will depend on how well you set up your filter unit in the first place. If you place it too close to the main line then yes, there could be such a drop (depending on how much pressure the unit has). The best thing you can do for this type of problem is to add an extension to each line until it reaches closer to where your filter system actually sits. There should already be some extra space behind each valve so take advantage and use this space to avoid any future problems with low water pressure every again.

If you keep all valves relatively close together and near each other once more, everything should go back to normal within no time at all. Now if any one particular faucet or fixture has very low water pressure, it could be an indicator that you have a blockage somewhere else in the main line. If so, your plumber will need to do some investigating into other areas before he/she can determine if everything is working correctly or not.

Whole House Water Filter Leaking From Top Or Other Spot?

If you have a leak somewhere else besides at the filter itself then what has probably happened is that your filter cartridge has been overused. Old pieces will eventually begin to wear down and since most of these parts cannot be replaced individually, you will have to replace all pieces after a long period of time (e.g., each year).

In order to avoid this type of problem from occurring within the future, make sure you only change your filter piece when it is absolutely necessary in place. If not, then there will be no way for any one part of the entire system to last more than a few months before needing replacement. Whole house water filters aren’t always made with commercial grade materials like find within types of filtering systems, which is why they do not last as long.

  1. Identifying Why Your Whole House Water Filter Is Leaking

If you have just installed a new filter but are having issues with leaks already then the best thing to do is to determine why this might be happening. The first thing you can try is turning off all faucets that are currently in use throughout your residence. If the dripping stops, then you now know exactly where the problem lies (i.e., one particular line).

Now take a look at each individual valve until you find which area has been experiencing problems. Once identified, begin closing up these supply lines until only one remains open for further inspection. Turn on this valve and see if it still has an issue or not. If everything works fine now, there’s no further reason to worry about any other piping systems within your home anymore. But if the same problem still persists, then you might have to take a closer look at your replacement filter piece.

  1. What To Do If Your Whole House Water Filter Is Leaking From The Top: Step-By-Step

If your replacement water filter has been installed correctly then you shouldn’t have too many issues with leaks for now. If the problem still persists, however, then there is a chance that either one of the valves were not tightened up enough or that parts are missing upon installation.

Turn off all faucets within your residence to avoid wasting water during this test. Now remove each individual line from its current position and re-attach it once more without any pieces missing. If this doesn’t work, take another look at each of the fittings to make sure they are properly placed on top of your valve before tightening them back up again.

  1. Preventing Future Leaks

Even if you do properly follow all the above steps, chances are that your lines will begin to leak again in the near future. Although this may seem like an annoyance, it’s actually better than having any other type of problem associated with low water pressure ever again.

Now to avoid these issues from occurring within the future, make sure you only change out all replacement pieces when they are absolutely necessary. If not, then there won’t be anything left on your filter system to last more than a few months before needing to be replaced once more. Since most whole house water filters aren’t made for industrial use like commercial grade ones, they often last much shorter periods of time (e.g., each year).

Advantages And Disadvantages Of Using A Whole House Water Filter

Using a whole house water filter system can be extremely beneficial to your home, especially if you are looking for ways to avoid purchasing bottled water constantly. While filtering out larger contaminants like bacteria is certainly helpful, the biggest advantage of these types of systems is their ability to improve the taste of water.

By removing any rust or corrosion particles within your tap water, you can ensure that each glass you pour tastes as crisp and refreshing as it should. Just make sure to replace all of your replacement filters regularly so this same problem doesn’t begin occurring too frequently in the future.

How Much Does It Cost To Install A Whole House Water Filtration System?

Whole house water filtration systems are very beneficial to homes, but the question of how much it costs is oftentimes difficult to answer. While buying a brand new one might be quite expensive, these same filters can also be found at your local home improvement store for just $40 or less. Since you’ll most likely only need to replace each piece every few months (depending on your usage), this amount will usually last for at least 6-9 months before needing another replacement.

What Size Whole House Water Filter Do I Need?

The size of your whole house water filter will not typically affect the total amount of time it takes to install it. Although some systems might be a little larger than others, every replacement piece should have a similar shape and fit perfectly into its designated spot within your home’s piping system.

The only part that you’ll need to take extra care with is making sure each line can properly fit onto its designated valve before tightening any additional pieces on top. If you’re having an extremely difficult time connecting these lines together, then there might be a leak somewhere along the way which needs to be fixed first before installing a brand new filter.

Can A Whole-House Water Filter Remove 100 Percent Of Contaminants?

Although a whole-house water filtration system can clean out a vast majority of contaminants, there is no guarantee that it will be able to remove all harmful particles from your tap water. If you’re going to be drinking or cooking with your filtered water, then this step might be necessary in order to prevent any future health problems from occurring as well.

For those who don’t mind using bottled water during their daily activities, you probably won’t need to take this additional step. However, if you would rather purchase one single pitcher filter for kitchen use and another smaller one for the bathroom, then this option will also work quite well too.

Whole House Vs. Reverse Osmosis Water Filtration Systems

Although there are many benefits to using a whole house water filtration system, these same systems should never be used in replacement of a reverse osmosis water filter. Whether you’re refilling your coffee maker with filtered tap water or cooking dinner for the entire family, removing the chlorine from within your tap water is always going to be necessary.

If you’ve been noticing a bad taste coming from each glass of drinkable water, then this probably means that every part of your home’s piping system needs to be refitted with new filters. Once these have been properly placed within each line, then you’ll finally begin to notice all of the positive changes being made.

Whole House Filters Vs Water Softener Systems

A whole house water filtration system might be great for removing any rust particles, but it will never be able to replace the need for a quality water softener. Although you can still purchase these types of systems from your local home improvement store, they are typically only sold as part of an entire set if this is the type of solution that you’re looking for.

If you’ve already spent quite a bit of money on multiple replacement filters over the last few years, then you should probably consider purchasing another water treatment system instead. Although both methods can help improve your daily life, each has its own specific functions that will prove to be beneficial in different ways.

Can A Whole House Water Filter Be Installed Outside?

Since these types of filters are best used within your home’s internal piping system, it will be almost impossible for you to install one directly outside. Sure, there might be some cases where these can be placed into an underground pit with its own separate water source, but every additional piece that is needed here will increase the total cost by quite a lot.

If you’re looking for a low-cost solution to purify your entire household’s drinking water, then you’ll find that most whole house filtration systems are usually only designed for indoor use. Since this is something that needs to be taken care of each time you turn on any tap throughout your home, it doesn’t make sense to spend extra money on this particular feature.

Are Whole House Water Filters Worth It?

Although there are many water filtration systems that can be used at home to improve the quality of your tap water, purchasing a whole house system might not always be necessary in all cases. If you already have multiple filters in place within each individual faucet, then this is something which you will need to take care of separately.

If you’ve recently noticed an odd smell or taste coming from your cup each time that you reach for it, then it might be time for you to invest into either a new filter or brand new whole house system. Although replacing these parts on your own can save you quite a bit of money over time, they’re far more likely to malfunction if they aren’t installed by a professional instead.

Can I Drink The Water Filtered With A Whole House Filtration System?

Since there are many types of whole house water filters that can be purchased for use within your home, finding out if you’ll be able to drink the purified tap water might not always be easy. Although some will allow you to drink directly from any tap inside your home, most others will only work on removing the need for boiling before drinking.

Since every type of filter works in its own unique way, checking with the manufacturer is usually the easiest way to determine if it can be used as a replacement for bottled drinking water. If you’ve recently noticed an odd taste or smell coming from each glass that you reach for, then replacing these parts with something different might just solve this issue once and for all.

How Long Does The Whole-House Water Filter Usually Last?

Since these types of filters are designed to work around the clock, they’re built in such a way where they’ll last for quite some time. Depending on how many people live within your home and how hard your local water supply is, most systems can run for anywhere between five and ten years before needing to be replaced.

Instead of purchasing another filter cartridge every month or so, it will be far more beneficial if you choose to purchase something larger instead. Although using something like this might cost you slightly more up front, it will save you money over time when compared to buying individual replacements with each passing year. 

Where Should A Whole House Water Filter Be Installed?

If you’ve recently noticed an odd taste or smell coming from your tap water, then it might be best to install either a whole house filter of some kind. Although these come in many forms and sizes, there are many of them that can be placed within the main external piping system of your home.

Since a large majority of these types of filters only clean your entire household’s water supply, having one directly outside is usually more beneficial than placing it further inside. This applies to both residential homes and larger commercial buildings alike. If you’re looking for something that will serve everything from your kitchen faucet all the way through to each internal bathroom fixture, this is more likely to get the job done right.

How Long Does Installing A Whole House Water Filter Take?

Although most types of whole house water filters can be installed within a matter of hours, this might not always be the case. Depending on the complexity and design of your home’s existing plumbing system, some parts will usually take longer to install than others.

If you’re looking for something that’s both affordable and convenient, there are many options for use which can be placed directly underneath your kitchen sink instead. Since placing these inside cabinets is much easier than working with something like copper tubing, it’ll save you quite a bit of time as well.


The conclusion of your blog post should summarize the main points and give a call to action for readers. For example, if you’re providing instructions on how to change a water filter at home, you might want to conclude with basic steps or provide contact information in case they have any questions about the process. If this is an informational blog post without specific instructions, consider ending it by calling attention back to what’s been discussed so far and emphasize why people should care about it now more than ever before. It doesn’t matter whether you’ve written something long-form or short-form; our suggestion here will help make sure that readers know where they stand when reading your content. What do we hope readers take away from this piece?

Read more:

[TOP 15] Best Water Filter Reviews In 2022

Brita Vs PUR: Which Is The Better Water Filter?

Things You Must Know Before Buying Shower Water Filters

Zero Water Vs Brita: Which Is The Better Water Filtering Pitcher Brand?

How Do Water Filter Pitchers Work?

How To Change Gravity Water Filters?

How To Install A Countertop Water Filter?

How To Clean Water Filter?

Types Of Water Filter Systems

How To Make Alkaline Water?

How To Change A Whole House Water Filter?

How To Change Refrigerator Water Filters In 2022?

How Do Water Filters Work?


Leave a Reply